After Loading The Media - MUTOH ValueJet VJ-1638UR Operation Manual

After loading the media...

[1]
Lever Up
[2]
[3] Make sure that the edges of the media is appropriately pressed by Pressurizing rollers.
Good
Pressurizing roller
[4]
When the media is not appropriately pressed by Pressurizing rollers, follow the procedure to adjust the position of the
roll media.
• Raise the media loading lever.
• Loosen Fixing levers of the right and left Roll media holders, and move the roll media to left or right.
• Press Roll media holder toward the printer and fix the Fixing levers.
Note
• If the media is not appropriately pressed by Pressurizing rollers, the media may be misaligned or creased during printing.
• When tightening Fixing lever, press Roll media holder toward the printer.
If you do not press Roll media holder, Fixing lever may not be completely locked because of the weight of the roll media.
Roll media
"Lever Up" is displayed on the Operation panel.
Lower the media loading lever.
Good
The edge of the roll media is protruding from
the pressurizing roller.
Not Good

After loading the media...

33