Set 7: Slant Check; Set 8: Single Head - MUTOH ValueJet VJ-1638UR Operation Manual

Set 7: Slant Check

Set 7: Slant Check

Set 8: Single Head

Set 8: Single Head
Important!
In case of any problems with the print heads, contact your local MUTOH dealer.
74

Set 7: Slant Check

Sets up slanting detection during media loading.
Setting values
Media Slant : Off
Media Slant : On
You can set whether or not to perform printing using only one Print head.
You can still print even if some of the print heads malfunction. However, in that case the
printing speed will drop.
Setting values
Single Head : Off
Head Select : 1
Head Select : 2
Slant Check is not performed.
This is the initially set value.
Slant Check is performed.
Select this setting to use all the print heads for
printing.
This is the initially set value.
Select this setting to use only print head 1 for
printing.
Select this setting to use only print head 2 for
printing.