MUTOH ValueJet VJ-1638UR Operation Manual page 137

Display
Life Times [UV Lamp *]
Life Times [C Pump]
Power Off
S/C Reading
*** Remote Mode ***
Roll Remain Error
Roll Near End: *m
Installed Wiper? -> No
Installed Wiper? -> Yes
Start Ink Charge -> E
Ink Comb. : * color
Insert CleaningCart.
Busy-Washing
Remove Cartridges
Insert Ink Cartridges
Ink Refill **%
Empty WasteInk -> E
The operational life of the UV Lamp has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
The operational life of the Circulation pump has almost expired.
(Continues operation)
Contact your local MUTOH dealer.
Turning OFF the printer.
Wait for a while.
Reading the S/C card.
The remote panel mode is running, via VSM or similar. In the remote panel
mode, operations via the operation panel are not possible. To terminate the
remote panel mode, press the [Cancel] key for more than two seconds.
The remaining roll paper count has become 0. (Printing stops)
The remaining roll paper count is almost 0. The remaining roll paper is *m.
Install the cleaning wiper.
Startup Guide
After installing the cleaning wiper, press the [Enter] key.
Ink charging starts. Press the [Enter] key.
Select the ink type you want to use from 4-color set or 6-color set.
Washing Print head.
Install cleaning cartridges.
• Initial charging, ejecting filler fluid.
• Washing the print head by cleaning fluid.
Please wait a while.
Washing Print head or discharging ink.
Remove cleaning cartridges.
Charging the ink.
Insert ink cartridges (High capacity ink pack adapters).
Charging the ink.
Please wait a while.
Transfer the waste fluid from the waste ink tank into a container, and press
the [Enter] key.
"Emptying waste fluid tank" P. 106
Description
Status messages 137