MUTOH ValueJet VJ-1638UR Operation Manual page 103

[3]
3 sec.
3 sec.
[4]
slot 4
Y
slot 4
C
Steps for High capacity ink pack adapter
1.
Removing the High capacity ink pack adapter
[1]
[ 4 6 ] Ink End
Ink End
[2]
[3]
Prepare new ink cartridges and agitate it as described below.
• Place the lint-free cloth over the ink plug of the cartridge, turn the
plug up and maintain vertical position for three seconds.
• Rotate cartridge upside down (plug facing down) and hold for three
seconds.
• Repeat it 10 times.
x 10
Note
When replacing varnish ink or cleaner, you do not have to agitate it.
Insert new ink cartridges into Ink cartridge slots.
• Make sure to match the ink cartridge color with the label of this
printer.
• The arrow should face up.
• Insert all the way to the end.
Important!
Make sure you insert the ink cartridges into the original slots. Even
when you have the same color ink cartridges, do not switch and insert
them into different slots.
Press the [Enter] key.
• The buzzer stops.
• In the icons shown on the left, the Slot 4 and 6 ink bags need
replacing.
Remove High capacity ink pack adapters from the ink cartridge slots.
Detach the light-shielding cover from the ink bag.
Replacing ink 103