Canceling Printing; Cutting Media - MUTOH ValueJet VJ-1638UR Operation Manual

Hide thumbs Also See for ValueJet VJ-1638UR:

Table of Contents

Canceling printing

Press!

Note

• When loading the new roll media, cut the front edge of the media if it is not straight.

• When the media detection is set to "Off", the media cannot be cut automatically.

"**>6: Media Initial" P. 67

• If the Output mode menu is set to "Auto Cut", the printer cuts the media automatically after printing.

"Set 2: Output Mode" P. 70

• The cutter is a consumable component. Replace it periodically.

"Replacing Cutter" P. 126

Press and hold the operation key on the operation panel for two

seconds or more during printing.

• The printing is canceled (it cannot be restarted).

• The printing data sent to the product are deleted.

Note

You can alternatively do this via the printer driver or the VSM's remote panel.

Press the [Cutting] key on Operation panel for more than two seconds.

• The printer feeds the roll media to the length of the margin and cuts

the media.

Press!

Table of Contents