Set 4: Origin; Set 5: Head Travel - MUTOH ValueJet VJ-1638UR Operation Manual

Set 4: Origin

Set 4: Origin
Note
Depending on the set value of the side margin, the maximum set value of Y (print head transferring distance) decreases.
"Set 1: Side Margin" P. 70
The right side margin will be the following sum depending on the setting.
Y of Origin menu + 8 mm (when the spitting is set to On Media) + Value set in Side Margin menu.
"Set 1: Side Margin" P. 70
"Set 20: Spitting" P. 81

Set 5: Head Travel

Set 5: Head Travel
72

Set 4: Origin

Sets the beginning of printing (origin) of the print data.
Set the menu when reprinting on the margin with changing the printing data position to
the printed media.
Use the [+] / [ - ] key to enter the value, and press the [Enter] key.
Setting values
X (PF) : -15000 mm
・
・
・
X (PF) : 15000 mm
Y (CR) : 0 mm
・
・
・
Y (CR) : 1690 mm
Sets up the range that Print head moves while printing.
Setting values
Distance : Data
Distance : Machine
Distance : Media
Distance : Data Edge
X (media feeding distance):
-15,000 mm to 15,000 mm
Y (print head transferring distance)
0 mm to 1,690 mm
Print head moves the range of the print data
width.
Print head moves from origin to the maximum
printable media width.
Print head shifts within the media width.
This is the initially set value.
Print head only travels within the range where
the image exist.
Since this setting can optimize the head
traveling width, the printing speed will be
faster compared to "Data" setting.