MUTOH ValueJet VJ-1638UR Operation Manual page 146

The printing position is
incorrect (some parts of
the media cannot be
printed on).
Printing is blurred.
White or black lines appear
on printed media.
"Loading the media" P. 29
P. 35
146 Printing-related troubleshooting
Is the media loaded correctly?
‐ Load the media correctly.
Did you set up the origin?
‐ Cancel or reset the settings of the origin.
Is the media printed on the printing surface?
‐ Check the printing surface of the media and set it correctly.
Did you perform Print quality adjustment?
‐ Perform Print quality adjustment.
Did you perform Media feed adjustment?
‐ Perform Media feed adjustment.
Is the media loaded correctly?
‐ Load the media correctly.
Does the media contain moisture or are you using the creased or
wrinkled media?
- Replace it with the new media.
Are Nozzles in good condition?
‐ Perform Nozzle check.
Then if nozzle missing is found, conduct cleaning.
Did you perform Print quality adjustment?
‐ Perform Print quality adjustment.
Did you perform Media feed adjustment?
‐ Perform Media feed adjustment.
, ,
"Set 4: Origin" P. 72 "**>2: Adjust Print>" P. 59
, ,
"**>3: PF Adjust" P. 63 "Nozzle check and cleaning"