Performing Initial Charging After Head Cleaning - MUTOH ValueJet VJ-1638UR Operation Manual

Performing initial charging after head cleaning

[1]
Press!
[2]
Start Ink Charge
[3]
Empty WasteInk
[4]
Insert Ink Cartridges
Steps for ink cartridge
[1]
3 sec.
3 sec.
[2]
132

Performing initial charging after head cleaning

-> Enter
- > E
x 10
slot 4
Y
slot 4
C
Turn the printer ON.
• Blue light becomes ON.
• The product starts initialization operations.
When the message to the left is displayed, press the [Enter] key.
When the message on the left appears, transfer the waste fluid into a
container.
"Emptying waste fluid tank" P. 106
The message on the left will appear.
Make sure you agitate the ink cartridge after you unpack it.
• Turn the ink plug upward and wait for three seconds.
• Next, turn the ink plug downward and wait for three seconds.
• Repeat that 10 times.
Note
You do not have to agitate varnish ink and cleaner before use.
Insert ink cartridge to this printer.
• Match the label of this printer to the color of ink cartridge.
• The arrow should face up.
• Insert all the way to the end.
Important!
Load the same ink color configuration as before.