MUTOH ValueJet VJ-1638UR Operation Manual page 123

2.
Putting the printer into the CR maintenance mode
[1]
1
Press!
2
[2]
Menu1:
[3]
Menu3:
[4]
Set1 :
[5]
Set12 :
[6]
CR Maint. :
Wait for a while
[7]
CR Maint. :
Take Up
Auto Cut
Sleep Mode >
Setup >
Side Margin
CR Maintenance
Start
End
Press the [Menu] key.
The message on the left will appear.
Press the [ - ] key several times, to bring up the display on the left.
• Press the [>] key.
The message on the left will appear.
Press the [ - ] key several times, to bring up the display on the left.
• Press the [Enter] key.
Press the [Enter] key.
• The carriage and cleaning wiper move to maintenance position.
The message on the left will appear.
• You can start replacement.
Replacing absorption material for the flushing box 123