Connecting To A Computer - MUTOH ValueJet VJ-1638UR Operation Manual

Connecting to a Computer

Important!
Make sure your computer meets the following requirements.
• OS: Windows 10 (64bit), Windows 8/8.1 (64bit), Windows 7 (64bit)
• CPU: Intel (R) Core (TM) i5 / i7
• Memory: No less than 8G byte
• Network: Use a network port that supports Gigabit Ethernet, and an Ethernet cable that supports Category 6 Gigabit Ethernet
or later.
[1]
[2]
[3]
Use the printer operation panel to set the IP address, subnet mask and gateway.
"Initial 3: IP Address" P. 93
Note
• The above illustration is the example of peer-to-peer connection between this product and computer.
Connection method differs depending on the usage environment.
• If you use the product with a LAN, connect the cable so that the computer and printer are on the same subnet.
Connect the Gigabit Ethernet cable to the product.
Connect the Gigabit Ethernet cable to the computer.
,
"Initial 4: Subnet Mask" P. 93
,
"Initial 5: Gateway" P. 93

Connecting to a Computer

17