Table of Contents
Advertisement
[5]
[6]
[7]
Replacing Adapter's plug for High capacity ink pack adapter
When the plug life runs out, the error LED on the operation panel turns on and a message is displayed.
Follow the procedure below to replace the plug.
[1]
[ 1 ]
[2]
Follow the procedure described in the operation manual for High capacity ink pack adapter.
"3.3 Replacing Adapter's plug"
[3]
[ 1 ]
Plug Changed?
[4]
[ 1 ]
Plug Changed?
slot 4
Y
slot 4
C
Change Plug
No
Yes
Make sure that the lock lever of the High capacity ink pack adapter is
back to its original position.
Place the light-shielding cover over the ink bag.
Note
Insert the light-shielding cover inside the High capacity ink pack adapter to only cover
the ink bag.
Re-insert the High capacity ink pack adapters into Ink cartridge slots.
• Make sure to match the ink color with the label of this printer.
• Insert all the way to the end.
Important!
Make sure you insert the High capacity ink pack adapters into the
original slots. Even when you have the same color ink packs, do not
switch and insert them into different slots.
Press the [Enter] key.
When inserting the replaced adapter, the message on the left will appear.
• Press the [ - ] key.
Press the [Enter] key.
• The adapter's plug lifetime counter will be reset.
Important!
• If the adapter's plug is not replaced, do not choose "Yes".
• Ink leakage may occur by continuing to use such adapter's plug.
Replacing Adapter's plug for High capacity ink pack adapter
105
Advertisement
Table of Contents
Troubleshooting
