Replacing Consumable Parts; Replacing Absorption Material For The Flushing Box - MUTOH ValueJet VJ-1638UR Operation Manual

Replacing consumable parts

3

Replacing consumable parts

Replacing absorption material for the flushing box

The flushing box is a part that keeps receiving ink discharged from the print head. Please replace the absorption material for the
flushing box periodically. If used without replacing, it can cause damage to the print head.
Replacing period:
• Approx. every two months (since it differs depending on usage frequency, please check periodically)
Preparation:
• Plastic gloves
• Rubber gloves
• Goggles
• Absorption material for the flushing box
• Paper you can get dirty (paper which ink will not bleed through)
CAUTION
Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.
For this operation, be sure to wear the supplied gloves (or solvent resistant gloves) and goggles to prevent ink from contacting
with your eyes or skin.
1.
Checking steps
[1]
[2]
When to Replace
[3] Close the maintenance cover.
122

Replacing absorption material for the flushing box

Open the maintenance cover on the right side.
Check the absorption material for the flushing box.
• When there are lumps of ink rise from the frame of the flushing box,
it is time to replace.