Emptying Waste Fluid Tank - MUTOH ValueJet VJ-1638UR Operation Manual

Emptying waste fluid tank

3

Emptying waste fluid tank

Emptying waste fluid tank

In the following cases, move the waste fluid in the waste fluid tank into a container to discharge it.
• When Waste fluid tank is more than half full
• When "Empty Waste Ink -> E" is displayed
• When "Full WasteInkTank" is displayed
Display messages
Empty Waste Ink
Full WasteInkTank
WARNING
Do not mix waste fluid with any other chemicals, even in a small amount.
If mixed with other chemicals (e.g. oxidizing agent), it may produce heat.
Before pouring waste fluid into a container, make sure:
• the container is empty.
• inside the container is completely dry.
CAUTION
Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.
For this operation, be sure to wear the supplied gloves (or solvent resistant gloves) and goggles to prevent ink from contacting
with your eyes or skin.
106 Emptying waste fluid tank
Empty the waste fluid tank.
-> E
• The printer stops initial cleaning. After emptying the tank, press the
[Enter] key to resume the cleaning.
The waste fluid tank has become full. Empty the waste fluid tank
immediately.
• Printing or other operation will stop. It will resume when you have
transfered the waste fluid.