Wearing the gloves and goggles
3
Wearing the gloves and goggles
Skin or eye contact with UV curable ink may cause skin inflammation or allergic reaction.
Wear protective gloves, goggles and/or face shield, and clothing while using of the printer.
Especially when performing any of the following operations, be sure to wear the supplied gloves (or solvent resistant gloves)
and goggles.
•
"Agitating ink" P. 98
•
"Replacing ink" P. 102
•
"Replacing Adapter's plug for High capacity ink pack adapter" P. 105
•
"Emptying waste fluid tank" P. 106
•
"Daily Maintenance" P. 109
•
"Replacing absorption material for the flushing box" P. 122
•
"Replacing the cleaning wiper" P. 128
How to wear the supplied gloves
CAUTION
Do not touch uncured UV ink with bare hands.
• If glove becomes contaminated with ink, replace it with new.
• If protective clothing becomes contaminated with ink, immediately remove and wash for re-use.
• If ink gets on skin, immediately wash with soap and plenty of water for 15 minutes.
Seek medical advice/attention if irritation or inflammation are present.
• If ink gets in eyes, flush eyes with plenty of water for 15 minutes and seek medical advice/attention
immediately.
• If swallowed, rinse mouth immediately and do not induce to vomiting.
Seek medical advice/attention.
Wear the rubber gloves (white) over the plastic gloves (pink).
How to wear the supplied gloves
97