MUTOH ValueJet VJ-1638UR Operation Manual page 61

Steps
1.
Print a confirm pattern and check it for printing errors.
2.
Print "Rough adjustment pattern" and look for a place that is properly adjusted in the printing results of print
head 1.
•
If you selected "Adj. Print 2: Custom", select "ALL" or "A" to "F".
•
The number printed under the pattern without alignment errors is the adjustment value.
3.
Enter the adjustment values.
4.
Follow the same procedure to adjust print head 2.
5.
Print "Fine adjustment pattern" and look for a place that is properly adjusted in the printing results of print
head 1.
•
If you selected "Adj. Print 2: Custom", select "ALL" or "A" to "F".
•
The number printed under the pattern without alignment errors is the adjustment value.
6.
Enter the adjustment values.
7.
Follow the same procedure to adjust print head 2.
1. Confirm pattern
• Press the [Enter] key to carry out printing.
• Check the printing results. If there are shifting problems, proceed to rough adjustment pattern printing.
• In the picture below, there are misalignments.
Good Not good
・ ・ ・
Note
• Because this printer has two Print heads, two rows of confirmation pattern will be printed.
• The above pattern is the example when the printer is set to 4-color setting.
Not Good
Print Head 1
Print Head 1
Panel setup menu
・ ・ ・
61