Continuously Using Printer After Daily Maintenance - MUTOH ValueJet VJ-1638UR Operation Manual

Continuously using printer after daily maintenance

In following cases, clean the daily maintenance parts.
• If faint print or dot missing still persists even after head cleaning has been performed.
• If you perform printing all day without entering to sleep mode and you need to perform daily maintenance.
Preparation:
See
"Preparing for Daily Maintenance" P. 110
Important!
If you want to continuously use the printer after this maintenance, follow the steps below.
If you will not use the printer after this maintenance, enter to sleep mode and then perform maintenance.
"Daily Maintenance" P. 109
1.
Putting the printer into the Daily maintenance mode
[1]
1
Press!
2
[2]
Menu1:
[3]
Menu7:
[4]
Mnt.1 :
[5]
Daily Maint. :
Wait for a while
[6]
Daily Maint. :
to prepare items required for the maintenance.
Take Up
Auto Cut
Sleep Mode >
Maintenance >
Daily Maint.
Start
End
Press the [Menu] key.
The message on the left will appear.
Press the [ - ] key several times, to bring up the display on the left.
• Press the [>] key.
Press the [Enter] key.
Press the [Enter] key.
• The carriage and cleaning wiper move to gain access to daily
maintenance.
The message on the left will appear.
• You can start daily maintenance.

Continuously using printer after daily maintenance

117