Test 6: Head Adjust - MUTOH ValueJet VJ-1638UR Operation Manual

Test 6: Head Adjust

Test 6: HeadAdjust >
When "HeadAdj. 2 Custom" is selected
Head Adj. 2 :
86

Test 6: Head Adjust

There are 4 print heads installed in the carriage of this product.
In this menu, you can align the print head 1 to print head 4 in order to prevent the prints
from being misaligned. Press the
Align the heads in the following cases:
• If the image quality does not improve after you have used the "Adjust Print" menu.
• When switching to thin media or a type of media where ink drops do not spread.
After executing this menu, be sure to perform the "Adjust Print" function.
If you don't, the image quality during bidirectional printing may drop.
Submenus
Head Adj. 1 :
Head Adj. 2 :
You can select the adjustment method.
Custom
When selecting "Fine Pattern X (A to F)", select the option that corresponds to the print
mode used for printing.
If the resolution, pass and the printing direction of the RIP print mode differ from the print
mode for the User Type, select the fine pattern that is suitable for the RIP.
"Adjustment patterns for each print mode" P. 60
Submenus
Adj. 1 :
Adj. 2 :
・
・
・
Adj. 7 :
[>]
key to open the submenu.
Adjustment is performed only for the print
Standard
mode set by the current User Type.
You can make the adjustments more quickly
than by selecting "Fine Pattern ALL" in
"Custom".
When selecting "Standard" here, you need to
use the same print mode settings for the RIP
(Raster Image Processor) as the print mode
settings for the User Type.
Use the same settings for the resolution, pass
and printing direction in the RIP print mode as
in the print mode for the User Type.
You can also adjust a print mode other than the
Custom
one used for the current User Type. You can
print with an optimal image quality even if the
RIP print mode is different from the print mode
used for the User Type.
Adjusts all the patterns.
Fine Ptn. ALL
For printing an adjust pattern selected from A
Fine Pattern A
to F.
Fine Pattern F