MUTOH ValueJet VJ-1638UR Operation Manual page 129

[3]
[4]
[5]
[6]
[7] Attach the maintenance cover, and then close it.
[8]
CR Maint. :
CR Maint. :
Detach the maintenance cover.
• Wear the rubber gloves (white) over the plastic gloves (pink).
• Wear protective goggles.
Remove the cleaning wiper.
• Lift the cleaning wiper hook and release the hook. Then, remove the
cleaning wiper.
Important!
When removing the cleaning wiper, be cautious of ink drops.
Follow the steps below to install new cleaning wiper.
• Slide the front side of the new cleaning wiper into its slot.
• Press the wiper hook down until it clicks into place.
Important!
Do NOT touch the cleaning wiper rubber with your bare hand.
If finger oil gets on the rubber, it will damage the print head.
Press the [Enter] key.
End
The message on the left will appear.
Start
• That ends the procedure.
Replacing the cleaning wiper 129