MUTOH ValueJet VJ-1638UR Operation Manual page 104

[4]
[5]
2.
Attaching ink bag
[1]
3 sec.
3 sec.
[2]
[3]
[4]
104 Replacing ink
x 3
Good
NotGood
Lower the lock lever on the High capacity ink pack adapter and detach
the empty ink bag.
Note
Place the used ink bag in a plastic bag or the like and dispose of it in accordance with
local ordinances and municipal instructions.
Remove the S/C card from the High capacity ink pack adapter.
Prepare the new ink bag, and agitate it as instructed below.
• Turn the ink plug upward and wait for three seconds.
• Next, turn the ink plug downward and wait for three seconds.
• Repeat that three times.
Note
When replacing varnish ink, you do not have to agitate it.
Slide the S/C card into the tabs of the adapter.
While lowering the lock lever of the High capacity ink pack adapter,
insert an ink bag.
• Make sure to fully insert the ink bag into the High capacity ink pack
adapter.
Confirm ink bag is fully seated by checking the lock mechanism is at
the top of the ink delivery neck through the observation window, see
proper placement in illustration left.