MUTOH ValueJet VJ-1638UR Operation Manual page 134

[7]
Ink charging procedure after loading ink set
Ink Refill
CAUTION
During ink charging, make sure:
• Not to turn OFF the printer.
• Not to unplug the power cable of the printer.
• Not to open the front cover.
• Not to open the maintenance cover.
• Not to raise the media loading lever.
Media End
Important!
If the printer perform the nozzle check printing immediately after the initial ink charge is complete, the following results may
occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow
If there is no improvement in the print result even after performing "Little Charge" , leave the printer unused for an hour or more.
Then perform "Little Charge" again and check the print result.
If there is still no improvement, contact your local Mutoh dealer.
134 Performing initial charging after head cleaning
slot 4
Y
slot 4
C
**%
"Menu 5: Cleaning" P. 88 and perform "Little Charge" . Then, check the print result.
Insert the High capacity ink pack adapter.
• Match the colors of the label on the printer and the label on the
High capacity ink pack adapter.
• Firmly insert it all the way in.
Important!
Load the same ink color configuration as before.
The message on the left will appear.
• Ink charging begins.
When ink charging is complete, the message to the left is displayed.