Set 9: Nozzle Select; Set 10: Roll Length - MUTOH ValueJet VJ-1638UR Operation Manual

Set 9: Nozzle Select

Set 9: Nozzle Select
Note
• You cannot select this menu when using 6-color for printing.
• You can also use this in combination with the "Single Head" menu.
"Set 8: Single Head" P. 74

Set 10: Roll Length

Set 10: Roll Length
When the "Roll Kind" is set to "Roll 1", "Roll 2" or "Roll 3"
Length menu
Roll Kind :
Enter
You can set whether to reduce the print head nozzles to half for printing.
Print speed will be decreased, but the image quality will be improved.
This menu will only appear in 4-color configuration.
•
Setting values
Nozzle Select :
Nozzle Select :
Nozzle Select :
Sets up the roll media length.
Setting values
Roll Kind :
Roll Kind :
Roll Kind :
Roll Kind :
Sets up the roll media length.
Roll 1
Setting values
Length :
Nozzle Select is not used.
ALL
This is the initially set value.
Prints using half of the print head nozzles.
Nzl. A
Prints with one nozzle line of the 2 nozzle lines
per color.
Uses the nozzle line opposite of "Nozzle A".
Nzl. B
Roll Length is not used.
Off
This is the initially set value.
Sets up the roll media length.
Roll 1
The set values of the roll media length can be
set as "Roll1" to "Roll3".
Roll 2
Roll 3
1 m to <30 m> to 200 m
30 m
<> indicates the initial value.

Set 9: Nozzle Select

75