Setting The Printing Precision; Head Adjustment - MUTOH ValueJet VJ-1638UR Operation Manual

Setting the Printing Precision

1

Setting the Printing Precision

Before starting to print for the first time, adjust the printing precision.

Head adjustment

You can print out the adjustment pattern in this menu to check the misalignment of the print head, and then adjust it.
Adjustment methods for this printer are as follows.
Head Adj. 1 :
Head Adj. 2 :
Note
• Print quality may improve by head adjustment in the following situations:
Print quality is poor when using the uni-direction print mode
Print quality does not improve even after performing print quality adjustment
• After you have performed head adjustment, make sure you perform print quality adjustment.
There may be misalignment caused by head adjustment.
• When changing the print mode after performing standard head adjustment, make sure you adjust print head.
• Since all print modes are adjusted at once after performing Custom head adjustment, head adjustment is not required even after changing the print mode.
• When specifying a print mode for RIP software, etc, that is different from the mode set in the user type setting, perform Custom head adjustment and check
all patterns (A to F), and then adjust any patterns that are misaligned beforehand.
38

Head adjustment

Adjusts only the print mode used by the current user definition.
Standard
When you have adjusted the print mode using Standard, make the
resolution, pass count, and print direction of the print mode on the RIP
side equal to those of the userdefined print mode.
Allows you to adjust also a print mode other than the print mode used by
Custom
the current user definition.
This method optimizes print quality even if the print mode on the RIP side
is different from the user-defined mode.
"Print quality adjustment" P. 40
"Details of print mode" P. 58