When It Becomes Time To Replace Ink; Replacing Ink - MUTOH ValueJet VJ-1638UR Operation Manual

When it becomes time to replace ink

When the ink level becomes low, the error LED of the operation panel flashes and a buzzer sounds.
Steps
[1]
[ 2 ] Ink Low
Ink Low
[2] Prepare the replacement ink.
Note
Sleep mode continues after stopping the buzzer.

Replacing ink

When a cartridge or pack is out of ink, the error LED on the operation panel flashes with beep sounds.
The printer pauses printing. After replacing with the new ink, it resume printing.
Important!
• Do not replace ink when the power of this product is OFF. Ink level cannot be detected correctly.
• If ink is moved from cold to warm place, leave it at least three hours.
WARNING
Leave ink cartridges (ink bags) away from fire or high temperature objects.
It may cause fire.
Steps for ink cartridge
[1]
[ 4 6 ] Ink End
Ink End
[2]
102

When it becomes time to replace ink

Press the [Enter] key.
• The buzzer stops.
• In the figure to the left, the slot 2 ink cartridge (ink bag) is nearing
replacement.
Press the [Enter] key.
• The buzzer stops.
• In the icons shown on the left, the Slot 4 and 6 cartridges need
replacing.
Remove ink cartridges from Ink cartridge slots.