MUTOH ValueJet VJ-1638UR Operation Manual page 69

**>9: Add Y Layer
* *> 9: Add Y Layer
White-underlay
Three-layer print
"Add Y Layer" ON
Note
In Three-layer print data, when "**>9: Add Y Layer" is set to ON, varnish is blended into KCMY layer as top layer.
**>10: User Copy
* *> 10: UserCopy
**>11: Initial
* *> 11: Initial
When "**>9: Add Y Layer" is set to ON, the yellow layer is added underneath of the White-
underlay or Three-layer print data to preserve the color of the white layer and the color
layer overlaid.
• This function is available in 6-color set.
Setting values
Add Y Layer : Off
Add Y Layer : On
This is for copying the currently selected User Type setting into another User Type.
Setting values
UserCopy : Type 1 ->
UserCopy : Type 1 ->
Returns all settings of the currently selected User Type to factory default.
Yellow layer is not added.
This is the default setting.
Add the yellow layer under the white layer of
White-underlay or Three-layer print data.
KCMY + Varnish Layer
White Layer
Media
Varnish Layer
KCMY Layer
White Layer
Media
KCMY Layer + Varnish Layer
White Layer
Yellow Layer
Media
Select the User Type to copy the settings into.
2
If you select ALL, the settings will be copied
into all the User Type.
ALL
Panel setup menu 69