Steps
1.
Print the Head adjustment pattern and look for a place in the pattern that has least white lines or overlapping
images.
•
The number printed under the pattern without alignment errors is the adjustment value.
2.
Enter the adjustment value.
Head adjustment pattern
• Press the [Enter] key to carry out printing. For the Head adjustment pattern, the same patterns will be printed on both sides
and center of the media.
• Check the print results and select the number that looks most aligned between 1 and 7.
• Pattern names such as "Pattern E: 4" are shown on the display. Use the [+] / [ - ] key to enter the number of the best-adjusted
pattern, and press the [Enter] key.
• In the case of the picture below, enter "5", so that the display reads "Pattern E: 5".
• If you selected "Head Adj. 2: Custom" and "Fine Pattern ALL", enter the adjustment value for A to F.
6
Note
The above pattern is the example when the printer is set to 4-color setting.
5
4
7
6
5
4
3
2
(If you carried out the adjustment with Custom settings,
the head height and the printing information will also be printed.)
Pattern Name
E
Q1/Q2
1
Current Print Mode
Test 6: Head Adjust
87