Set 15: Header Dump; Set 16: Exhaust Fan - MUTOH ValueJet VJ-1638UR Operation Manual

Hide thumbs Also See for ValueJet VJ-1638UR:

Table of Contents

Set 15: Header Dump

Set 15:

Header Dump

Note

• The data will be useful when contacting technical support.

• Performing printing if the printer is connected to PC, the print settings of RIP soft you are using are printed on data header.

Set 16: Exhaust Fan

Set 16:

Exhaust Fan

Sets whether to print the following information when printing.

• Data header

• Data dot number (printed only when Header damp setting is "On")

• Printing date and time

• Printer serial number

• Firmware version

• Receiving time (printed only when Header damp setting is "Dump")

• Receiving size (printed only when Header damp setting is "Dump")

Setting values

Header Dump :

Off

Header Dump :

Dump

Header Dump :

Sets up Exhaust fan operation.

Ventilates the inside of the printer to stabilize the parts performance. It also decreases the

contamination by ink mist inside the printer.

We recommend that you use Exhaust fan, especially when printing for a long time.

Setting values

Exhaust Fan :

Off

Exhaust Fan :

Low

Exhaust Fan :

High

Dump data is not printed.

This is the initially set value.

Dump data is printed after the original image is

printed.

Prints only damp data.

"Data dot number" is not printed.

Prints the last header dump.

If no history is available, "No Print Data" will

appear on the operation panel.

Turn Off Exhaust fan.

Start Exhaust fan at Low.

This is the initially set value.

Start Exhaust fan at High.