Table of Contents
Advertisement
Requirements for usable media
Media that meet the requirements below can be used with this printer.
Usable sizes
Important!
The default setting for the head height is "Low".
When the head height is set to "Low" , the maximum available media thickness is 0.3 mm.
Cautions for handling media
To achieve expected print quality, follow the instructions below.
Failure to follow these instructions could result in damage to the printer.
• Use media with no wrinkle, fold or curl.
• Do not use heat-sensitive media.
The heat given off by the UV rays could deform such media.
• Do not use media that are liable to reflect the UV light.
The reflective UV light can cure the ink on the print head.
Outer diameter
150 mm or less
Media tube
2 inches or 3 inches
diameter
Weight
30 kg or less
Maximum
1,625 mm
width
Minimum
182 mm
width
Maximum
1.3 mm (When the head height is set to "High")
thickness
Requirements for usable media
21
Advertisement
Table of Contents
Troubleshooting
