MUTOH ValueJet VJ-1638UR Operation Manual page 118

2.
Cleaning daily maintenance parts
The maintenance procedure and parts to be cleaned are the same as
Follow the steps described in
•
"Cleaning of UV Lamp" P. 112
•
"Moistening the surface of print head nozzles" P. 113
•
"Cleaning of print head circumference" P. 114
•
"Cleaning of cleaning wiper and the circumference of the cap" P. 115
Important!
Make sure to complete this maintenance within 10 minutes while the printer is in Daily maintenance state.
3.
Finishing maintenance
[1]
Close the front cover and the maintenance cover.
[2]
Daily Maint. :
[3] The printer automatically performs the "Short" cleaning.
[4] • Dispose of the used cleaning stick.
• Use a paper towel to wipe the maintenance cleaner off the dropper.
• Dispose of the maintenance cleaner in the plastic cup and dry the cup well using the paper towel.
Important!
• Do not reuse a cleaning stick.
Dusts can adhere causing damage to the print head.
• Check that the lid of the maintenance cleaner is shut properly and store it.
[5]
Now the maintenance is complete.
118 Continuously using printer after daily maintenance
"Performing Daily Maintenance" P. 112
End
"Daily Maintenance" P. 109
to clean each part.
Press the [Enter] key.
.