Replacing Cutter - MUTOH ValueJet VJ-1638UR Operation Manual

Replacing Cutter

Replacing period:
• When the media is not cut smoothly
• When the cut surface is feathered, etc
Preparation:
• Cutter replacement blade
CAUTION
• Do not push the knob of cutter or release suddenly.
Because there is a spring under the cutter, the cutter can jump out.
• Do not touch the cutter blade.
It may cause injury.
Steps
[1] Put the printer into the CR maintenance mode.
"Putting the printer into the Daily maintenance mode" P. 117
[2]
[3]
126

Replacing Cutter

Open the maintenance cover on the left side.
Close the cover next to the maintenance cover.