Table of Contents
Advertisement
Menu 1: Sleep Mode
4
Menu 1: Sleep Mode
Menu 1:
Sleep Mode >
Important!
During Sleep Mode, even if the set amount of time has passed, Head cleaning is not performed under the following circumstances.
• When the front cover is open.
• When the maintenance cover is open.
• Media loading lever is raised.
• The waste fluid tank is full.
• Ink cartridges or High capacity ink pack adapters have been removed.
• The inserted S/C card is not the genuine S/C card, etc.
If one of the above conditions occurs during Head cleaning, cleaning is stopped.
When the printer returns to a normal state, Head cleaning is restarted.
56
Panel setup menu
Activate Sleep Mode.
Make sure to follow the instructions on the operation panel to perform daily
maintenance.
"Sleep Mode" P. 27
Submenu
Sleep Mode 1 :
Start
Press the [Enter] key to start Sleep Mode.
Advertisement
Table of Contents
Troubleshooting
