Table of Contents
Advertisement
Initial 3: IP Address
Initial 3:
IP Address
Note
Be sure to set the IP address, the Subnet Mask, and the Gateway after consulting the network administrator.
Initial 4: Subnet Mask
Initial 4:
Subnet Mask
Initial 5: Gateway
Initial 5:
Gateway
Sets the IP address of the printer.
• Use the [+] key to increase a setting value.
• Use the [ - ] key to decrease a setting value.
• Press the [Enter] key to confirm your input for a value. The cursor will move on to the
next setting value.
• Confirm your input for each value.
Setting values
IP :
192.
168.
1.
Sets the subnet mask of the printer.
• Use the [+] key to increase a setting value.
• Use the [ - ] key to decrease a setting value.
• Press the [Enter] key to confirm your input for a value. The cursor will move on to the
next setting value.
• Confirm your input for each value.
Setting values
MASK:
255.
255.
255.
Sets the gateway.
• Use the [+] key to increase a setting value.
• Use the [ - ] key to decrease a setting value.
• Press the [Enter] key to confirm your input for a value. The cursor will move on to the
next setting value.
• Confirm your input for each value.
Setting values
GW:
192.
168.
1.
0.0.0.0 to <192.168.1.253> to 255.255.255.255
253
<> indicates the initial value.
0.0.0.0 to <255.255.255.0> to 255.255.255.255
0
<> indicates the initial value.
0.0.0.0 to <192.168.1.254> to 255.255.255.255
254
<> indicates the initial value.
Initial 3: IP Address
93
Advertisement
Table of Contents
Troubleshooting
