MUTOH ValueJet VJ-1638UR Operation Manual page 100

Steps for High capacity ink pack adapter
Note
For proper instructions of High capacity ink pack adapter, see the High Capacity Ink Pack Adapter Operation Manual.
[1]
[2]
[3]
[4]
3 sec.
3 sec.
[5]
100 Agitating ink
Remove High capacity ink pack adapters from the ink cartridge slots.
Using the paper towel provided with the printer to wipe off the ink
attached to the insertion point for High capacity ink pack adapters.
Tilt High capacity ink pack adapters, use cleaning stick provided with
the printer, and absorb the ink collected around the tube connectors.
• Tilt High capacity ink pack adapter so that the caution label is facing
down.
• Tilt High capacity ink pack adapter so that the insertion point is
lowered a little.
• To prevent the ink bag and the High capacity ink pack adapter from
separating, hold one hand against the top of the ink bag. Rotate the
plug of the ink bag vertically and hold for 3 seconds.
• Then, invert the ink bag with the adapter and hold for 3 seconds.
• Repeat that 10 times.
x 10
Re-insert the High capacity ink pack adapters into Ink cartridge slots.
slot 4
Y
• Make sure to match the ink pack color with the label of this printer.
• Insert all the way to the end.
slot 4
C
Important!
Make sure you insert the High capacity ink pack adapters into the
original slots. Even when you have the same color ink packs, do not
switch and insert them into different slots.