Operation Panel - MUTOH ValueJet VJ-1638UR Operation Manual

Operation panel

Power button
・ Pressing this turns the power on.
Lights steady in blue when the
power is on.
・ Pressing this once more turns the
power off. Is unlit when the power
is off.
・ Flashes while data is being
received, in the sleep mode, and at
other times.
[Reference]
The symbol means "standby". Even when
the power button is not turned on, the printer
consumes a tiny amount of power so long as
the power cable is connected. This state is
referred to as the power being "off" in this
Manual.
[Head Height] indicator
・ High setting: High indicator is ON.
・ Low setting: Low indicator is ON
[Take up] indicator
Lights steady green when the
Output mode is set to "Take-up".
[Auto Cut] indicator
Lights steady green when the
Output mode is set to "Auto Cut".
[Menu] key
Used for accessing and exiting the
menu.
[Pause] / [Cancel] key
・ Press this key to pause printing.
・ Holding this key pressed down
for two seconds or longer will
cancel the print job and delete
the data received.
When setting the menu:
・ Cancels a change of a setting
value.
[+] key / [Backward feed] key
Media is fed in the backward
direction.
When setting the menu:
・ Press this to move to another
menu item
・ Press this to change a set value.
[-] key / [Forward feed] key
Media is fed in the forward
direction.
When setting the menu:
・ Press this to move to another
menu item
・ Press this to change a set value.
Error indicator
・ Lights up in orange when an error
has occurred or a cover is open.
・ Flashes when the ink is low.
Display
Displays the printer status, setting
menu, errors and so on.
[Cleaning Mode] indicators
Light steady green to indicate the
head cleaning mode.
[Enter] key
When you have set a media in
place, pressing and holding this
down for two seconds or longer will
run a media cut.
When setting the menu:
・ Press this to go to the menu item
you select.
・ Press this to confirm a set value.
[<] key / [Nozzle Check] key
Pressing and holding this down for
two seconds or longer will run a
nozzle check.
When setting the menu:
・ Press this to change a set value.
[>] key / [Cleaning Mode] key
・ For changing the cleaning mode.
・ Pressing and holding this down
for two seconds or longer will
execute head cleaning.
When setting the menu:
・ Press this to move to a lower level of
menu items.
・ Press this to change a set value.
Name of each part 11