Set 17: White Maintenance; Set 18: Start Feed; Set 19: Initialization - MUTOH ValueJet VJ-1638UR Operation Manual

Set 17: White Maintenance

Set 17: White Maint.
Note
White ink tends to settle or coagulate inside the print head or ink tubes.
Therefore, the printer regularly discharges a small amount of white ink to maintain the performance, even in standby status.

Set 18: Start Feed

Set 18: Start Feed
Note
With take-up system: if you want to set "Start Feed" to below 0, set "Page Gap" to "Narrow".
f not, the Start Feed setting is not reflected properly.
"When the "Output Mode" is set to "Take Up"" P. 70

Set 19: Initialization

Set 19: Initialization
80

Set 17: White Maintenance

Sets up white ink's maintenance operation.
• If you do not usually use white ink for regular printing, set to "Little" to
minimize white ink consumption in standby status.
• This menu will only appear in 6-color configuration.
Setting values
White Maint. : Normal
White Maint. : Little
You can change the margin setting between images.
• Value over 0: The margin setting between images will be wider than when setting "0".
• Value equal to 0: The default margin setting between images will be applied.
• Value below 0: The margin setting between images will be smaller than when setting
"0".
Setting values
Start Feed : 150 mm
Returns the settings of the printer to default.
Submenus
Init : ALL
Init : UserType
White ink maintenance operation will be
carried out at a normal frequency.
This is the default setting.
White ink maintenance operation will be
carried out at a lower frequency.
-10 mm to <150 mm> to 500.0 mm
<> indicates the initial value.
For initializing the settings of all the menus.
Initializes the settings in the User Type menu.