Unpacking And Setting Up The Ultima Cutter; Unpacking The Body - MUTOH Ultima User Manual

Cutting plotter

Table of Contents

2.3. UNPACKING AND SETTING UP THE ULTIMA CUTTER

Notes

•

When unpacking the cutter, check whether all parts described in the parts list are included in the box.

Consult your dealer if anything seems to be missing.

•

Lifting the machine out of the box should be done by two people. This to avoid back injuries.

•

Protect the plotter from firm shocks.

•

Do not dismantle the unit

To unpack the cutter, please follow the instructions mentioned below:

Step 1 :

Open the box.

Step 2 :

Remove the buffer box.

Step 3 :

Remove the packaging leg set.

Step 4 :

Take out the cutter box.

Step 5 :

Lift the cutter unit out of the box and put it on a flat and stable surface.

Step 6 :

Remove all plastic wrapping materials.

Step 7 :

Remove the pieces of foam, protecting the tool head during transportation.

Step 8 :

If you had your cutter delivered with a stand, please refer to the instructions for mounting the

stand.

User's Guide – Ultima cutting plotter

AP-75032, Rev 2.2, 20/04/07

Table of Contents

Show Quick Links

Table of Contents