Replace Cutter Blade; Standard Knife Holder - MUTOH Kona User Manual

User's Guide Kona cutting plotter
Basics
3.3.2

Replace cutter blade

To replace a blade, please follow the procedure below:

Standard knife holder

Step 1:
Step 2:
Step 3:
Step 4:
38
Hold the body (2) into one hand and unscrew the base part (1)
Remove the spring (3) and the cutting blade (4).
Slide the spring over the new cutting blade
Place the new blade with its spring into the base part and screw the whole assembly
onto the body.
AP-75380 - Revision 1.2