Mutoh Ultima Multi-Purpose Cutting Plotter - Operation Instructions
2.3. UNPACKING AND SETTING UP THE ULTIMA CUTTER
Notes :
To unpack the cutter:
Step 1 :
Open the box.
Step 2 :
Remove the buffer box.
Step 3 :
Remove the packaging set.
Step 4 :
Take out the cutter box.
Step 5 :
Lift the cutter unit out of the box and put it on a flat and stable surface.
Step 6 :
Remove all plastic wrapping materials.
Step 7 :
Remove the pieces of foam, protecting the tool head during transportation.
Step 8 :
If you had your cutter delivered with a stand, please refer to the instructions for mounting the
stand.
When unpacking the cutter, check whether all parts described in the parts list are
included in the box. Consult your dealer if anything seems to be missing.
Lifting the machine out of the box should be done by two persons. This to avoid
back injuries.
Protect the plotter from firm shocks.
Do not dismantle the unit
13
AP-75125, Rev 1.3 ; 20/10/04