Program Features; Contents Of This Chapter; Programmable Analogue Inputs; Programmable Analogue Outputs - ABB ACS880 Supplement Manual

Program features

Contents of this chapter

This chapter describes the features of the SPRS control program. It also lists the
features not included in this control program compared to the ACS880 primary control
program.

Programmable analogue inputs

The drive has two programmable analogue inputs: one voltage input (0/2 to 10 V or
-10 to 10 V) and one current inputs (0/4 to 20 mA). Three extra analogue inputs are
available to scale the input values of the SPRS RMIO in counts.
Settings
Parameter
Group 12 Standard AI
Group 77 Speed and
Feedback SEL

Programmable analogue outputs

Two programmable current outputs (0/4 to 20 mA) are available as standard. The
analogue output signals can be proportional to motor speed, process speed (scaled
motor speed), output frequency, output current, motor torque, motor power, etc.
You can write a value to an analogue output through a serial communication link.
Additional information
Standard outputs for selecting and processing analogue output
values.
AI as a reference source
Program features 29
6