Port 7; Port Control Register 7 (Pcr7); Figure 9.4 Port 7 Pin Configuration - Renesas H8 Series Hardware Manual

Section 9 I/O Ports
9.4

Port 7

Port 7 is a general I/O port also functioning as a timer V I/O pin. Each pin of the port 7 is shown
in figure 9.4. The register setting of TCSRV in timer V has priority for functions of the
P76/TMOV pin. The pins, P75/TMCIV and P74/TMRIV, are also functioning as timer V input
ports that are connected to the timer V regardless of the register setting of port 7.
Port 7 has the following registers.

• Port control register 7 (PCR7)

• Port data register 7 (PDR7)
9.4.1 Port Control Register 7 (PCR7)
PCR7 selects inputs/outputs in bit units for pins to be used as general I/O ports of port 7.
Bit Bit Name

7
6 PCR76
5 PCR75
4 PCR74

3 to 0
Rev. 3.00 Sep. 14, 2006 Page 128 of 408
REJ09B0105-0300
Port 7

Figure 9.4 Port 7 Pin Configuration

Initial
Value R/W Description
 
Reserved
0 W Setting a PCR7 bit to 1 makes the corresponding pin an
output port, while clearing the bit to 0 makes the pin an
0 W
input port. Note that the TCSRV setting of the timer V has
0 W
priority for deciding input/output direction of the
P76/TMOV pin.
 
Reserved
P76/TMOV
P75/TMCIV
P74/TMRIV