Renesas H8 Series Hardware Manual page 143

16-bit single-chip microcomputer

Hide thumbs Also See for H8 Series:

Table of Contents

Section 7 ROM

The FLMCR1, FLMCR2, and EBR1 settings are retained, however program mode or erase mode

is aborted at the point at which the error occurred. Program mode or erase mode cannot be re-

entered by re-setting the P or E bit. However, PV and EV bit setting is enabled, and a transition

can be made to verify mode. Error protection can be cleared only by a reset.

Rev. 3.00 Sep. 14, 2006 Page 113 of 408

REJ09B0105-0300