BO–38
"A"
"A"
Cowl Louver Edge
BODY
–
FRONT WIPER AND WASHER
INSTALLATION
1.
INSTALL WINDOW WASHER NOZZLE
2.
INSTALL WIPER LINK TO MOTOR
3.
INSTALL THESE PARTS:
(a)
Wiper motor assembly
Torque: 5.5 N·m (55 kgf·cm, 49 in.·lbf)
(b)
Cowl louvers and weatherstrip
N20998
4.
INSTALL WIPER ARMS
(a)
Operate the wipers once and turn the wiper switch OFF,
then install the wiper arms.
HINT:
If the driver's side wiper arm mount has a blue dot on it, use an
ITT wiper arm. If there is no mark, use a ND wiper arm.
(b)
Adjust the installation position of the wiper arms as shown
(blade tip to cowl louver edge).
"A" Approx. 35 mm (1.4 in.)
H01772
(c)
Tighten the wiper arm nut.
Torque: 24 N·m (245 kgf·cm, 18 ft·lbf)
Author :
Date :
BO0LN–01
2386