AX–54
AUTOMATIC TRANSAXLE
SECOND BRAKE INSPECTION
INSPECT DISCS, PLATES AND FLANGE
Check if the sliding surface of the discs, plates and flange
are worn or burnt. If necessary, replace them.
HINT:
S
S
SECOND BRAKE PISTON ASSEMBLY
INSTALL PISTON
(a) Coat a new O–ring with ATF.
(b) Install the 2 O–rings on the piston.
(c) Press the piston into the drum, being careful not to dam-
age the O–rings.
–
SECOND BRAKE
If the lining of the disc is peeling off or discolored, or
even if a part of the printed numbers are defaced, re-
place all discs.
Before assembling new discs, soak them in ATF for
at least 15 minutes.
AX0FM–02
AX0FN–02