AUTOMATIC TRANSAXLE
OVERDRIVE CASE DISASSEMBLY
1.
REMOVE C
DRIVE CASE
(a) Using snap ring pliers, remove the snap ring.
(b) Remove the retaining plate and two springs.
(c) Remove the accumulator piston.
(d) Remove the O–ring from the piston.
2.
REMOVE OIL SEAL RINGS
Spread the 2 rings apart and remove them.
OVERDRIVE CASE INSPECTION
INSPECT OVERDRIVE CASE BEARING
Check that the bearing turns smoothly with your finger.
–
OVERDRIVE UNIT
ACCUMULATOR PISTON FROM OVER-
0
AX–73
AX0G4–02