Toyota Camry Manual page 297

AUTOMATIC TRANSAXLE
3. CHECK OPERATION OF ONE–WAY CLUTCH
4. INSTALL THRUST WASHERS
(a) Coat the 2 thrust washers with petroleum jelly.
(b) Align the tab of the washers with the hollow of the carrier.
RING GEAR FLANGE REPLACEMENT
1. REMOVE RING GEAR FLANGE
(a) Using a screwdriver, remove the snap ring.
(b) Remove the flange from the ring gear.
2. INSTALL RING GEAR FLANGE
(a) Position the flange into the ring gear.
(b) Using a screwdriver, install the snap ring.
– REAR PLANETARY GEAR
AX–57
AX0FT–02