Toyota Camry Manual page 354

AX–114
AUTOMATIC TRANSAXLE
25. INSTALL NO.1 ONE–WAY CLUTCH AND SECOND
BRAKE HUB
(a) Align the flukes of the discs in the second brake.
(b) Align the spline of the hub with the flukes of the discs and
install the hub to the second brake discs.
(c) Check the distance between the surfaces of the second
brake hub and rear planetary gear.
Distance:
26. INSTALL SUN GEAR AND SUN GEAR INPUT DRUM
While turning the sun gear clockwise, install it into the
one–way clutch.
27. INSTALL FRONT PLANETARY GEAR ONTO RING
GEAR
(a) Coat the races and bearing with petroleum jelly, and
install them onto the ring gear.
Bearing and race
mm (in.)
Front Race
Bearing
Rear Bearing
– COMPONENT PARTS INSTALLATION
Approx. 5 mm (0.20 in.)
Outer Diameter
37.9 (1.492)
36.1 (1.421)
35.0 (1.378)
Inner Diameter
22.0 (0.866)
22.2 (0.874)
19.0 (1.102)