Toyota Camry Manual page 308

AX–68
AUTOMATIC TRANSAXLE
9. REMOVE INTERMEDIATE SHAFT BEARING
Using SST, press out the bearing from the shaft.
SST 09950–00020
10. REMOVE COUNTER DRIVE GEAR AND FRONT
BEARING
Press out the gear and bearing together.
11. REMOVE REAR BEARING
Using SST, press out the bearing.
SST 09950–00020
12. REMOVE OVERDRIVE PLANETARY RING GEAR
FROM COUNTER DRIVEGEAR
(a) While pulling up the ring gear, compress the snap ring
with needle–nose pliers and remove it from the groove.
(b) Remove the ring gear from the counter drive gear.
13. REMOVE OUTER RACES FROM COUNTER DRIVE
GEAR
Drive out the 2 races with a brass bar and hammer.
– OVERDRIVE UNIT