CH–14
SST (C)
SST (C)
Turn
SST (B)
Push
CHARGING (5S–FE)
(d)
(e)
P04210
(f)
(g)
SST (A)
P04395
(h)
Turn
SST (A)
P13598
4.
(a)
Inside
NOTICE:
Be careful of the rubber insulators installation direction.
S05075
(b)
S05074
–
GENERATOR
Mount SST (C) in a vise.
Insert SST (B) into SST (C), and attach the pulley nut to
SST (C).
To torque the pulley nut, turn SST (A) in the direction
shown in the illustration.
Torque: 110.5 N·m (1,125 kgf·cm, 81 ft·lbf)
Remove the generator from SST (C).
Turn SST (B), and remove SST (A and B).
INSTALL RECTIFIER HOLDER
Install the 4 rubber insulators on the lead wires.
Install the rectifier holder while pushing it with the 4
screws.
Torque: 2.9 N·m (30 kgf·cm, 26 in.·lbf)
Author :
Date :
1761