Toyota Camry Manual page 585

(b)
(b)
(a)
BODY –
7. REMOVE DOOR GLASS AND RUN
(a) Remove the bolt and nut holding the rear side frame to the
door.
(b) Remove the 2 bolts holding the door glass to the window
regulator.
Torque: 8.0 N·m (80 kgf·cm, 71 in.·lbf)
(c) Remove the rear side frame and the rear section of the
door glass run.
Torque: 5.5 N·m (55 kgf·cm, 49 in.·lbf)
N20974
HINT:
Pull the door glass run upward.
(d) Remove the door glass.
(e) Remove the entire door glass run.
HINT:
Pull the door glass run upward.
8. REMOVE REAR DOOR BELT MOULDING
Clip
Pry the rearward end of the rear door belt moulding from the
door and remove the moulding.
N21008
9. REMOVE REAR DOOR UPPER MOULDING
: 7 rivets
(a) Using a drill, cut the flange portion of the 5 rivets.
: clips
HINT:
: clips
Use 5 new rivets.
: clips
(b) Insert a screwdriver between the door and the rear door
upper moulding and pry it off.
H01743
REAR DOOR
Author :
BO–19
Date :
2367