Toyota Camry Manual page 516

AUTOMATIC TRANSAXLE
(d) Install the rear planetary gear.
11. INSTALL DISCS, PLATES AND FLANGE OF FIRST
AND REVERSE BRAKE
(a) Install the 6 plates and discs.
Install in order:
P=Plate D=Disc
P–D–P–D–P–D–P–D–P–D–P–D
(b) Install the flange, facing the flat end downward.
(c) Install the snap ring.
HINT: Be sure that the end gap of the snap ring is not
aligned with one of the cutouts.
12. CHECK FIRST AND REVERSE BRAKE
(a) Check the operation of the first and reverse brake piston.
Apply compressed air into the case passage and confirm
that the piston moves.
(b) Using a filler gauge, check that pack clearance of the first
and reverse brake.
Clearance:
– COMPONENT PARTS INSTALLATION
1.92–2.68 mm (0.0756–0.1055 in.)
AX–113