Toyota Camry Manual page 500

AUTOMATIC TRANSAXLE
4. DISASSEMBLE DIFFERENTIAL CASE
(a) Drive out the pinion shaft lock pin from the side on which
the ring gear is installed.
(b) Remove the pinion shaft from the case.
(c) Remove the 2 pinions and side gears with the 4 thrust
washers.
DIFFERENTIAL CASE ASSEMBLY
1. ASSEMBLE DIFFERENTIAL CASE
(a) Install the removed thrust washers to the side gears.
(b) Install the side gears with thrust washers, pinion thrust
washers and pinion gears.
(c) Install the pinion shaft.
– DIFFERENTIAL ASSEMBLY
AX–97
AX0U0–02